Description
These flat fenders for RIBs come in three sizes, so they can be adapted to the different points of contact between the boat and the pontoon, other vessels or any potential obstacle. This type of fender is very effective when there are small gaps between moored boats.
The three models are made from a foam that does not absorb water. They are blue on the outside and white on the inside.
Here are the technical specifications for each of the flat fenders:
65 x 30 x 7 cm , supplier reference: DP-2
50 x 30 x 5 cm , supplier reference: DP-1
95 x 30 x 7 cm , supplier reference: DP-3
The flat fender protects boat hulls when manoeuvring in port or when parked. This exterior boat equipment leaves no trace on the hull and is easy to store in a locker.
We recommend using at least 3 flat fenders per side, or covering 2/3 of the length of the hull. The capstan nut is also recommended for suspending them from supports or mooring cleats. Flat fenders can also be used as cushions.
The three models are made from a foam that does not absorb water. They are blue on the outside and white on the inside.
Here are the technical specifications for each of the flat fenders:
65 x 30 x 7 cm , supplier reference: DP-2
50 x 30 x 5 cm , supplier reference: DP-1
95 x 30 x 7 cm , supplier reference: DP-3
The flat fender protects boat hulls when manoeuvring in port or when parked. This exterior boat equipment leaves no trace on the hull and is easy to store in a locker.
We recommend using at least 3 flat fenders per side, or covering 2/3 of the length of the hull. The capstan nut is also recommended for suspending them from supports or mooring cleats. Flat fenders can also be used as cushions.